Gemba Partner

Faik Suat Çakır

Lean Systems Specialist

A Lean Systems Specialist who has carried out TPS/TPM practices in paint and plastic injection plants at Toyotasa since 1993 and has been consulting since 2019.

Faik Suat Çakır, Lean Systems Specialist
BIOGRAPHY

Who Is Faik Suat Çakır?

Born in Zonguldak in 1967, Faik Suat Çakır graduated from the Electrical Department of KATÜ Vocational School and then from the Business Administration undergraduate program at Anadolu University, after which he worked as a manager at Enka A.Ş. for 4 years, 2 of them in Libya.

He started at Toyotasa in 1993 and went to Japan for Japanese language training and TPS / TPM training. After completing line training, he took an active role in commissioning the surface treatment processes and the Cataphoresis system of the paint plant that was under installation. He worked as an instructor in classroom and line training for new hires.

In 1997–2002, in addition to surface treatment and Cataphoresis systems, he also took responsibility for the Sealer – Underbody PVC coating and Primer Painting processes; while carrying out these duties he also successfully served as instructor and shop floor leader across Toyota Turkey in process planning techniques, TPS and business development training for suppliers, and in line with changing production demands.

In 2004 he played an active role in the investments and in carrying out all processes in the setup of the Plastic Injection plant at Toyota Turkey.

Until 2014 he took leadership roles in the Plastic Injection plant in TPS, Kaizen, Training, Cost, Occupational Safety, 5S, Built-in Quality, Ergonomics, Investments, Model Project preparations and TPM implementation groups.

He took important roles in launching many vehicle models at Toyota and carried out benchmarking studies at Toyota plants in Japan during Turkey's preparations for these models.

He developed his competencies in detecting production problems at an early stage and taking measures to reduce vehicle costs, and in improving design processes through VA & Kinsetsuka activities, ensuring efficient processes were established. After completing his duties there, he left the Toyota Turkey plant in 2014 to use his knowledge in different areas and worked actively for 5 years as General Manager at Özüaydın in the logistics and port operations service sector. During this role he managed all processes such as operations management, finance, sales, planned maintenance, supplier management and cost management. He carried the TPS philosophy into the service sector.

After retiring from his professional life, in 2019 he began consulting in order to share his knowledge and experience with Turkish industry. During this time he has supported many companies, from automotive to heavy industry, from ISO 500 to SMEs, in improving key functions such as TPM, TPS, Injection - Paint shop efficiency projects, line setups, Planning, Purchasing, etc.

← All our experts

Get in Touch to Work with Faik Suat Çakır

Please get in touch for detailed information.

+90 216 212 08 77·info@gembapartner.com·Esentepe Mah. Monumento Plaza No: 75/70, Kartal / Istanbul
Gemba Partner

Faik Suat Çakır

Lean Systems Specialist

A Lean Systems Specialist who has carried out TPS/TPM practices in paint and plastic injection plants at Toyotasa since 1993 and has been consulting since 2019.

Faik Suat Çakır, Lean Systems Specialist
BIOGRAPHY

Who Is Faik Suat Çakır?

Born in Zonguldak in 1967, Faik Suat Çakır graduated from the Electrical Department of KATÜ Vocational School and then from the Business Administration undergraduate program at Anadolu University, after which he worked as a manager at Enka A.Ş. for 4 years, 2 of them in Libya.

He started at Toyotasa in 1993 and went to Japan for Japanese language training and TPS / TPM training. After completing line training, he took an active role in commissioning the surface treatment processes and the Cataphoresis system of the paint plant that was under installation. He worked as an instructor in classroom and line training for new hires.

In 1997–2002, in addition to surface treatment and Cataphoresis systems, he also took responsibility for the Sealer – Underbody PVC coating and Primer Painting processes; while carrying out these duties he also successfully served as instructor and shop floor leader across Toyota Turkey in process planning techniques, TPS and business development training for suppliers, and in line with changing production demands.

In 2004 he played an active role in the investments and in carrying out all processes in the setup of the Plastic Injection plant at Toyota Turkey.

Until 2014 he took leadership roles in the Plastic Injection plant in TPS, Kaizen, Training, Cost, Occupational Safety, 5S, Built-in Quality, Ergonomics, Investments, Model Project preparations and TPM implementation groups.

He took important roles in launching many vehicle models at Toyota and carried out benchmarking studies at Toyota plants in Japan during Turkey's preparations for these models.

He developed his competencies in detecting production problems at an early stage and taking measures to reduce vehicle costs, and in improving design processes through VA & Kinsetsuka activities, ensuring efficient processes were established. After completing his duties there, he left the Toyota Turkey plant in 2014 to use his knowledge in different areas and worked actively for 5 years as General Manager at Özüaydın in the logistics and port operations service sector. During this role he managed all processes such as operations management, finance, sales, planned maintenance, supplier management and cost management. He carried the TPS philosophy into the service sector.

After retiring from his professional life, in 2019 he began consulting in order to share his knowledge and experience with Turkish industry. During this time he has supported many companies, from automotive to heavy industry, from ISO 500 to SMEs, in improving key functions such as TPM, TPS, Injection - Paint shop efficiency projects, line setups, Planning, Purchasing, etc.

← All our experts

Get in Touch to Work with Faik Suat Çakır

Please get in touch for detailed information.

Request a discovery call
+90 216 212 08 77 info@gembapartner.com Esentepe Mah. Monumento Plaza No: 75/70, Kartal / Istanbul